LED tape 5050 5m – LED tape with a power consumption of 14.4W/m. This means that the distance of 5 meters has a power consumption of 72W. In this case, the choice of the power supply should be at least about 80W (72W*10-15%).
How to choose the power supply for LEDs?
The selection method is straightforward and is based on a simple calculation at the elementary school level, whether before or after the educational reform. Multiply the power consumption of the tape of 1 m.b. by the number of meters connected to the power supply. We multiply: 5 x 4.8 = 24 W.
Which power supply for 24V LED?
12V LED strips and 24V LED strips require a constant voltage of 12 V or 24 V. LED power supplies are required for all LED systems based on a safe, low voltage supply.
Which power supply for an LED?
LED strips typically require 12 V DC (of course, there are also 230 V LED strips commercially available that do not require a power supply, but 12 V is by far the more common choice).
What kind of power supply for a 20m LED strip?
A power supply with a minimum power of 39.6W is needed to power this strip. We do not use a power supply lower than the calculated power here. You can find the strip’s information suitable for a 12V DC power supply in the product specification.
How many watts of power does the LED strip have?
The power supply must be at least 20% more potent than the power consumed by the LED strip you purchase. Our strip consumes 14.4W; we add 20% to it – that’s about 17.5W.
What kind of transformer for LED?
What kind of transformer for LED lamps in kitchens and bathrooms? Choosing a power supply with improved water resistance and IP protection parameters is good. Electronic power supplies and toroidal transformers should be avoided when operating LED lamps. They are not equipped with a stabilization system.
How many meters of LEDs are on one power supply?
In summary, if you want to have nice, even LED lighting, don’t forget about it: Do not connect LED strips longer than 7.5 m in a series connection. 7.5 m is also the maximum LED strip length in one section in case of parallel connection.