xinreal

Are there LED strips for 230V?

(Last Updated On: )

    LED strips with 230V are the most convenient variant of light decoration, which can be supplied directly from the mains, that is, from a standard socket, without needing an additional power supply. This also affects the ease of use and versatility of this solution.

How to check the LED power supply?

    After connecting to the Input of the 230V power supply, there should be a constant voltage of 12V at its Output. We can check if this is the case using a multimeter (meter). If the meter does not show anything at the output, it is sure that the LED power supply does not pass the 12V DC voltage to the output.

How to choose the power supply for the device?

    Just multiply the maximum output current and output voltage. An example of a switching power supply: 12 V/5 A/P (Figure 1), available from Delta, has an output voltage of 12 V with a current capacity of 5 A. According to the formula, the output power of this power supply is 60 W.

Which power supply for 12V LED lamps?

    A 12 volt DC power supply with voltage stabilization (switching adapter AC/DC) is the best and cheapest solution for powering 12-volt lumen max LED light sources. Such power supplies are also used to power laptops, tuners, and other electronic devices.

What power supply for LED strip 5050?

    To power 8 m of single-color 300LED 5050 RGB strip, we need a power supply with a minimum output of 115W (8 * 14.4W = 115.2W). Therefore, the smallest recommended power supply we can use is the 150 W power supply.

How do I hide the power supply for the LED strip?

    The best way is to place the power supply on a plasterboard floor. If it is too narrow, it can be hidden in the development in an inspection hole. However, remember to have free access to the power supply in case of malfunction.

How can I hide the LED power supply in the ceiling?

    If you install LED strips in a suspended ceiling (plasterboard), you can hide the power supply behind the panel. On the other hand, you can hide the LED power supplies that power the cabinet lighting in the cabinet, behind or on top of the cabinet.